Hand Held Resistance Weld Analyzer WeldScope WS-100

WS-100 WeldScope

The WS-100 monitors the secondary current and cycle time of resistance welders during the welding cycle. The results are shown on an LCD display screen which offers the choice of current measurement, waveform, history and system screens. The unit also includes a USB interface to a PC to allow easy conversion of the weld history to a .CSV file.

Adobe_PDF_file_icon_32x32 WS-100 Hand-Held Weld Scope Specification Sheet

Product Detail
Monitor:
  • Single Phase AC
  • Single Phase Rectifier
  • Three Phase Rectifier
  • MFDC
  • 50/60 Hz
Detection Ranges:
  • Current – AC: 0.6A to 50kA; DC: 1A to 50kA
  • Weld Time – 0.5 to 99 Cycles
  • Conduction Angle – 30 to 180 Degrees
  • Pressure – 0.5 to 10kN
Display:
  • Waveform – displays current waveform
  • Numeric- displays current, weld time and phase angle in an easy to read format
  • System – used to modify setup and configuration parameters
PC Communication Interface:
  • USB Type B (PC connection cable is TypeB-TypeA)
  • Software included to convert data to Excel/ .CSV file
Recharging Information:
  • Battery type -4 Ni-MH batteries (AA size)
  • Charging unit – AC Adapter
  • Input: AC 100~240V, 50/60Hz
  • Output: DC 9V, 1.3A
  • Continuous operation time = 8 hours
Maximum Storage Data:
  • Avg. RMS current and time: 10,000 weld points
  • RMS current of each cycle: 50 weld points
  • Waveform: 3 weld points
Other:
  • LCD Display
  • Power Source 120VAC
  • Fluorescent Graphic Display
  • Dimensions: 6.3” (W) x 1 .3” (H) x 3.4” (D)
  • Weight: 1 lb
  • Example of two different WeldScope WS-100 display options (below):

Navigation