ENTRON EN6001 Constant Current AC Controls with Retrofit/Upgrade Option
T. J. Snow is proud to introduce the next generation of Entron’s single phase resistance weld controls. The EN6001 Control offers a user-friendly interface, the quality the Entron name is known for, along with added quality control features that are required in today’s production environment. The control is available in a complete package in all the traditional cabinet sizes or as a retrofit kit that will allow you to upgrade your existing EN1000/1001 control in less than 30 minutes. For more information contact T. J. Snow Co.
Play Video about en6001 weld control features
Options to upgrade your existing Entron EN1000/1001 to the new EN6001
Play Video about retrofit thumbnail
You might also be interested in:
Single Phase AC Controls
Inverter (MFDC) Controls
Three Phase DC Controls
Specialty Controls
Weld Checker
Main Features
- 64 Programs (Internal or External Selection)
- Single SCR
- Primary or Secondary Constant Current
- Current Monitor High / Low Limits
- Primary Voltage Monitoring
- 10 Inputs (4 Fixed; 6 Programmable across 15 functions)
- 7 Outputs (3 Fixed; 4 Programmable across 12 functions)
Additional Features
- On Timer Membrane Keyboard with backlit 128×64 (81 lines) LCD graphic display
- Electrode management functions, including stepping, tip-dressing and preset curves
- Welding programs may be linked together for complex spot schedules (chained or successive)
- Refresh firmware through USB device
- Load / export control settings from / to USB device
- AC 60/50 Hz welding supported
- Spot / Pulsation / Seam Welding / Flash or Butt Welding / Brazing
- Multiple weld intervals plus pulsation, upslope and downslope
- Air-over-oil gun operation
- Retraction-maintained and momentary
- Water-saver
- Head lock function
- Phase shift monitor
- Half-cycle operation (Alt. / Pos. / Neg.)
Options
- Program Lockout (key switch)
- Operation Mode Switch (Program Lockout and Weld / No Weld)
- Error Reset Switch
- Vault Closing Door Mechanism (D & T cabinet doors equipped with vault locking mechanism to ensure security)
- Can be applied to spot welders, seam welders, special machines, or robotic equipment for welding materials of unequal thickness and coated materials
- Multiple cabinet options (Available in C, D, T, E, S cabinet styles with front or side-mounted control panels.)
- Circuit breakers available in C, D, T, and L cabinets (100A, 200A, 250A, 400A, 600A, 800A)
Weld Schedule Functions
- Schedule Number: 0 to 63
- Squeeze Delay: 0 to 99 cyc, 50/60 Hz
- Valve Mode: None / All combinations of 3 valves
- Weld1 Time: 0 to 99 cyc, 50/60 Hz
- Weld1 Current Regulation Mode: Phase Shift / Constant Current
- Heat1: 0 to 99% or 0 to 100.00 kA
- Cool1 Count: 0 to 99 cyc, 50/60 Hz
- Slope Control/ Up and Down Slope: 0 to 99 cyc, 50/60 Hz
- Weld2 Time: 0 to 99 cyc, 50/60 Hz
- Heat2: 0 to 99% or 0 to 100.00 kA
- Weld2 Current Regulation Mode: Phase Shift / Constant Current
- Current2 Count: 0 to 100.00 kA
- Cool2 Count: 0 to 99 cyc, 50/60 Hz
- Hold Count: 0 to 99 cyc, 50/60 Hz
- Off Count: 0 to 99 cycles
- Impulses: 1 to 99 cycles
- Heat / Current Offset: -15 to +15%
- Cycle Mode: Non-repeat / Repeat / Chained / Successive / Wait-here
- Digital Phase Shift Current Control, 10 to 99% in 1% current steps all weld current functions
- It is NOT necessary to program functions NOT required, program only functions required
Further ENTRON EN6001 Support:
EN6001 Initial Setup and Basics
Play Video about initial setup thumbnail
EN6001 Advanced Set Up
Play Video about advanced programming thumbnail
EN6001 Easy Weld SetUp
Play Video about entron en6001 thumbnail
EN6001 Upgrading Firmware
Play Video about upgrading firmware thumbnail