Build Your Own TuffCaps and Shanks

Build your own MALE CAP by simply choosing from the available options.

EXAMPLE: TA-14-.50

This would provide you with a Pointed tip male cap in alloy class 1 with a 4RW taper with a 1/2 inch weld face.

EXAMPLE DRAWING FOR REFERENCE	T	A	-1	4	-.50
	MALE CAP	NOSE DESIGNATION	RWMA ALLOY CLASS	RW TAPER	WELD FACE SIZE
	T	A=POINTED TIPS B=DOME TIPS C=FLAT TIPS D=OFFSET TIPS E=TRUNCATED TIPS F=RADIUS TIPS	1 2 3 Z	4 5 6 7	Enter your weld face size in fraction or decimals of inches or in millimeters, limited by body size

Build your own FEMALE CAP by simply choosing from the available options.

EXAMPLE: TP-14-C-12mm

This would provide you with a Flat tip female cap in alloy class 1 with a 4RW taper with a 12mm weld face.

EXAMPLE DRAWING FOR REFERENCE	TP	-1	4	-C	-12
	FEMALE CAP	RWMA ALLOY CLASS	RW TAPER	NOSE DESIGNATION	WELD FACE SIZE
	TP	1 2 3 Z	4 5 6	A=POINTED TIPS B=DOME TIPS C=FLAT TIPS D=OFFSET TIPS E=TRUNCATED TIPS F=RADIUS TIPS	Enter your weld face size in fraction or decimals of inches or in millimeters, limited by body size

Build your own SHANK by simply choosing from the available options.

EXAMPLE: TP-2411-08

This would provide you with a Straight Shank for a Female Cap, with a Shank length of 1 inch and an assembled length of 1-3/4 inches, with a RW Taper of 5RW. The offset, if desired, is added after a dash at the end of a model code.

STRAIGHT SHANK EXAMPLE DRAWING FOR REFERENCE BENT SHANK EXAMPLE DRAWING FOR REFERENCE	SHANK TYPE	ALLOY	RW TAPER NO.	SHANK LENGTH IN 1/4-INCH INCREMENTS	OFFSET IN 1/16-INCH INCREMENTS
	TP = MALE SHANK FOR A FEMALE CAP TG = FEMALE SHANK FOR A MALE CAP	2	4RW 5RW 6RW 7RW	06 07 08 09 10 11 12 !3 14 15 16	08 12 16