The EN2150 Series Control is a microprocessor based resistance welding control. This control is equipped with dual schedule, dual heat, with positive or negative 2 cycle feature.Initiation of two different weld schedules (Squeeze, Weld, Hold, and Percent of Current) are available on separate initiation inputs.
Both schedules retained in memory with power off
- Allows a choice of either Positive or Negative 2 cycle firing
Using the familiar and intuitive EN2000 platform, push-buttons and a three-step procedure make easy work of programming any welding schedule.
-
- Direct Reading Digital Data Display
- Simplified Design
- Direct Replacement for EN150
- Two Year Warranty
A two year warranty is offered on all ENTRON parts and assemblies.
Expert phone support and application service are available at no cost.
-
- Half Cycle Mode with Alternate Polarity and Polarity Reverse
- Dedicated Dual Schedule/ Dual Sequence Controls
Designed for use with single phase welding machines, robotic equipment, bench welders, tweezer welders, stitch welders, machines with small heads and special
machines
Features
- Spot Sequence
- Dual Weld/Dual Current
- LED Status Indicators
- All Functions Displayed Simultaneously
- Compact, Lightweight Air Cooled Cabinet
- Available with both 150 and 300A Air Cooled Contactors
- Optional Manual Current Adjust
Capabilities
-
- Two Schedules
- Weld Control Relays
- End of Sequence Output
- Dual Weld Programming
- Easily Programmed
- Programmable for 2 Cycle
Operation and Polarity Reverse
2 Cycle Positive Initiation
2 Cycle Negative Initiation
Alternate 2 Cycle Program
- Program Only the Functions Required
Specifications
Absolute Count:
Push Button Data Entry with Display
- Squeeze Count: 0 to 99 cyc, 50/60 Hz
- Weld Count: 0 to 99 cyc, 50/60 Hz
- Hold Count: 0 to 99 cyc, 50/60 Hz
- Digital Phase Shift Current Control, 10 to 99% in 1% current steps
- It is NOT necessary to program functions NOT required, program only functions required
Additional Features
- Microprocessor-based Circuitry
- Spot Sequence
- Dual Weld/Dual Current
- LED Status Indicators
- All Functions Displayed Simultaneously
- Compact, Lightweight Air Cooled Cabinet
- Available with both 150 and 300A Air Cooled Contactors
- Error Code/Fault Outputs
- 87⁰ First Half Cycle Delayed Firing, Anti-Saturation Circuit
- Dynamic Automatic Power Factor Equalization
- Dynamic Automatic Voltage Compensation, +20% of Nominal Line
- Emergency Stop Circuit
- Interlocking Pressure Switch Circuit
- Single Valve output standard (without transformer)
- Manual Current Adjust (optional)