Entron Controls for Resistance Welding EN2130

Adobe_PDF_file_icon_32x32 EN2130 Spec Sheet 

Bench Controls with Valve Output
The EN2130 Series Control is a microprocessor based resistance welding control. This control is equipped with dual schedule, dual heat, with positive or negative 2 cycle feature. Initiation of two different weld schedules (Squeeze, Weld, Hold, and Percent of Current) are available on separate initiation inputs.

  • Store 2 UNIQUE SCHEDULES : Both schedules retained in memory with power off
  • Allows a choice of either Positive or Negative 2 cycle firing
  • Single valve output circuitry
  • Control can be INTERFACED with external Programmable Logic Control (PLC)
  • Simple to Program 
    • Using the familiar and intuitive EN2000 platform, push-buttons and a three-step procedure make easy work of programming any welding schedule.
  • Direct Reading Digital Data Display
  • Simplified Design
  • Direct Replacement for EN130
  • Two Year Warranty
    • A two year warranty is offered on all ENTRON parts and assemblies. Expert phone support and application service are available at no cost.
  • Half Cycle Mode with Polarity Reverse
  • Dedicated Dual Schedule/ Dual Sequence Controls
  • Designed for use with single phase welding machines, rocker arm, press type welders, robotic equipment, bench welders, stitch welders, machines with small heads and special machines.

 

Features

  • Spot Sequence
  • Dual Weld/Dual Current
  • LED Status Indicators
  • All Functions Displayed Simultaneously
  • Compact, Lightweight Air Cooled Cabinet
  • Available with both 150 and 300A Air Cooled Contactors
  • Optional Manual Current Adjust

 

Capabilities

  • Two Schedules
  • Weld & Valve Control Relays
  • One Valve Output
  • Dual Weld Programming
  • Easily Programmed
  • Programmable for 2 Cycle
  • Operation and Polarity Reverse
  • 2 Cycle Positive Initiation
  • 2 Cycle Negative Initiation
  • Program Only the Functions Required

 

Specifications

Absolute Count:
Push Button Data Entry with Display

  • Squeeze Count: 0 to 99 cyc, 50/60 Hz
  • Weld Count: 0 to 99 cyc, 50/60 Hz
  • Hold Count: 0 to 99 cyc, 50/60 Hz
  • Digital Phase Shift Current Control, 10 to 99% in 1% current steps
  • It is NOT necessary to program functions NOT required, program only functions required

Additional Features

  • Microprocessor-based Circuitry
  • Spot Sequence
  • Dual Weld/Dual Current
  • LED Status Indicators
  • All Functions Displayed Simultaneously
  • Compact, Lightweight Air Cooled Cabinet
  • Available with both 150 and 300A Air Cooled Contactors
  • Error Code/Fault Outputs
  • 87⁰ First Half Cycle Delayed Firing, Anti-Saturation Circuit
  • Dynamic Automatic Power Factor Equalization
  • Dynamic Automatic Voltage Compensation, +20% of Nominal Line
  • Emergency Stop Circuit
  • Interlocking Pressure Switch Circuit
  • Single Valve output standard (without transformer)
  • Manual Current Adjust (optional)

EN2130

EN2130
Style “B” Cabinet
222mm x 222mm x 296mm
8-3/4″ x 8-3/4″ x 11-3/4″

 

You might also be interested in:

Single Phase AC Controls

Inverter (MFDC) Controls

Three Phase DC Controls

Specialty Controls

Weld Checker

Navigation