DeltaPoint (DPL Series)

Resistance Welding Water Flow Monitor

Stand alone water circuit E-Stop unit

Flow Range: .4 – 12 GPM (1.9 – 45.4 LPM)

Max Pressure: 190 PSI (13 BAR)

DeltaPoint detects leaks from cap loss, hose burst or inadvertent shutoff.

Monitoring robotic cells, pedestal welders or multiple work cells.

Water is shut down to stop the leak and a signal is sent to the controller.

The flow sensors have no moving parts to be affected by entrained contaminants.

The only mechanical parts are the shut off and check valves.

For a robot or PLC controlled water flow monitoring unit, see DeltaPoint Jr.

Product Detail
Features:
  • Stand alone package for installation ease
  • Sensor has no moving parts to wear, break or cause nuisance tripping
  • Visual flow indication reads in GPM or LPM
  • Visual Temperature indication reads in degrees F or C
  • User Programmable: Leak rate alarm, response time, restart delay, Flow OK level, temperature fault level and minimum flow monitoring.
  • Bypass – Electrical & Mechanical
  • Available Versions: AC, DC and DeviceNet
  • Available Range:4 GPM (15 LPM) and 12 GPM (45 LPM)
  • Water/Glycol coolant up to 20% mix
  • Alarms are digital or go from 0 to max voltage
  • Female micro-connectors
General:
  • Pressure Drop: 2.1 PSIG (0.1Bar) @ 6 GPM (22 LPM)
  • Differential Pressure Limits: 5 – 80 PSID (0.3 – 5.5 Bar)
  • Maximum Operation Pressure 190 PSI (13 Bar)
  • Fluid Temperature Limits 35-210°F (2-99°C)
  • Ambient Temperature Limits: 32 – 122 F (0-50°C)
  • Weight: 13.5 Lb (6.1 kg)
  • Wetted Material: Brass
  • Electrical Enclosure: Aluminum Optional mounting bracket
  • Optional valves: standard, heavy duty and air operated
  • Porting: 3/4 NPTF or BSPT
Flow/Temperature Sensors:
  • Accuracy ± 2% Full Scale Flow, ±1%Temperature
  • Repeatability ± .25% of actual flow
  • Response Time Flow: 1 second to 63% of flow change
  • Response Time Temperature : 1.8 seconds
  • Material: PVDF (Kynar)
Solenoid Valve:
  • Style: Diaphragm, 2-way pilot operated, NC
  • Cv:8.4
  • Mechanical Bypass Standard
  • Response Time: 1-1.5 seconds to shut off water. Length of hose run from unit to weld gun effects response time.
  • Material: Forged Brass
  • Seal: NBR (Buna N)
Check Valve:
  • Style: Piston, O ring seal
  • Material: Forged Brass
  • Seal: NBR (Buna N)
Electrical Specifications:
  • DeviceNet, DC or AC versions
Drawing:

Unit Pressure Drop Chart:


*Note: Cables are available for all versions.

Navigation