Welder Arms tuffaloy-logo

welder_arm1Class 2 spot welding machine arms made by Tuffaloy reduce set up time and give longer life. Electrode holder shanks can be attached to these arms from the front by bolting the cap over them, this means no extra clearance is required between the arms to allow running a shank up (or down) into a hole in the arm. It makes the insertion of Tuffaloy multiple-welding holders much easier. One of the most common failures of welding arms is the destruction of the bolt hole threads due to the relatively soft copper involved. Tuffaloy arms have a transverse steel bar insert in which the bolt hole threads are cut, dramatically improving thread life. Standard arm configurations are shown in the table. special arms are also available.
Welder Arms
Arm Diameter (A)Hole Diameter (B)Arm Length (C)DescriptionPart #
2112SH-7320-1630-7321
2116SH-7320-2630-7322
2120SH-7320-3630-7323
2-1/21-1/412SH-7320-4630-7324
2-1/21-1/416SH-7320-5630-7325
2-1/21-1/420SH-7320-6630-7326
31-1/212SH-7320-7630-7327
31-1/216SH-7320-8630-7328
31-1/220SH-7320-9630-7329

Navigation