Nut and Stud PM Holders tuffaloy-logo

TUFFALOY PM holders may be mounted directly to press-type welder platens, or they can be used as components of special weld fixturing. They come in two sizes, which match standard T-slot spacings (either of which can be furnished to hold any of the four standard tips: 4, 5, 6, or 7 RW). The smaller holder is for use on RWMA Size 1 welders, which have the 3-1/2 inch spacing. The larger one is for the Size 2 and 3 welders, which have the 5- and 6-inch spacing.Big, half-inch mounting bolts may be used to assure good conductivity. The holders may be used one-to-one or in multiples closely bunched. PM holders make special fixture building easy. They can be bolted to a fixture or back-up base as easily as to a platen. They are compact and have self-contained coolant systems. PAGE-27-8
PAGE-27-4
Size 1 PM Holder for Nut & Stud Welding Electrodes
Part NumberDescriptionTaper or Thread Size
T
350-4515
45151° 26' Type 1**
350-4560
45604RW
350-4561
45615RW
350-4580
45805/8-11
** For Type 1 Nut&Stud welding electrodes
PAGE-27-5
Size 2 PM Holder for Nut & Stud Welding Electrodes
Part NumberDescriptionTaper or Thread Size
T
350-4525
45251° 26' Type 1**
350-4526
45261° 26' Type 2***
350-4570
45704RW
350-4571
45715RW
350-4590
45905/8-11
** For Type 1 Nut&Stud welding electrodes *** For Type 2 Nut&Stud welding electrodes

Navigation