Unitrol Water Chillers

Water Chillers for Spot Welders

TJ Snow is an authorized distributor of Unitrol’s quality water chillers, manufactured in the USA since 1971. Water chillers play a crucial role in the operation of spot welders by efficiently regulating the temperature of the welding electrodes. Because of the intense heat generated during the resistance welding process, water chillers are integrated into the welding system to maintain optimal electrode temperatures by circulating chiller water through a closed-loop system.

MODEL 8000 CHILLER

4,000 BTU/Hr (1/3 TON)

The 8000 is a self contained system that is manually refilled. This chiller is ideal for portable applications such as robotics, or where plant layout precludes the use of a central chiller. Because of its small size, the Model 8000 is an ideal choice for OEM packaging into industrial machinery or laboratory equipment.

For welding applications, this model is ideal for cooling one or more TIG or MIG welders with a total capacity of up to 500 amps. It can also be used to cool a single spot welder (30 KVA or smaller).

Standard Features:

Stainless Steel Brazed Plate Condenser
Digital Water Temperature Controller
High & Low Refrigerant Safety System
Brass Positive Displacement Water Pump
Stainless Steel Water Storage Tank
Air Cooled Condenser
Low Water Level Safety System
Audible Fault Alarm
Washable Air Intake Filter
6′ Line Cord & Plug

Available Optional Features:

Casters
Control For Remote Analog Temperature Setting

MODEL 8012 CHILLER

6,000 BTU/Hr (1/2 TON)

The 8012 is a self contained system that is manually refilled. This chiller is ideal for portable applications such as robotics, or where plant layout precludes the use of a central chiller. Because of its small size, the Model 8012 is an ideal choice for OEM packaging into industrial machinery or laboratory equipment.

For welding applications, this model is ideal for cooling one or more TIG or MIG welders with a total capacity of up to 750 amps. It can also be used to cool a single spot welder (50 KVA or smaller).

Standard Features:

Stainless Steel Brazed Plate Condenser
Digital Water Temperature Controller
High & Low Refrigerant Safety System
Brass Positive Displacement Water Pump
Stainless Steel Water Storage Tank
Air Cooled Condenser
Low Water Level Safety System
Audible Fault Alarm
Washable Air Intake Filter
6′ Line Cord & Plug

Available Optional Features:

Casters
Control For Remote Analog Temperature Setting

THE A SERIES

Includes models 8025 through 8111 (¾ to 3¼ tons).

For resistance welding applications, models in this series will chill up to seven spot welders (up to 75 KVA each).

Standard Features:

Stainless Steel Brazed Plate Condenser
Digital Water Temperature Controller
High & Low Refrigerant Safety System
Stainless Steel Centrifugal Water Pump
Automatic Water Refill System
Polyethylene Water Storage Tank
Air Cooled Condenser
Low Water Flow Safety Switch
Water Filter Strainer
Washable Air Intake Filter
Water Pressure Gauge

Available Optional Features:

Water Cooled Condenser
Manual Refill System With Sight Glass
Casters
Split System With Remote Condenser
Low Temperature Kit For Outside Installation
Controller For Remote Analog Temperature Setting

THE B SERIES

Includes models 8200 through 8301 (5 to 10 tons).

For resistance welding applications, models in this series will chill up to 20 spot welders (up to 75 KVA each).

Standard Features:

Stainless Steel Brazed Plate Condenser
Digital Water Temperature Controller
High & Low Refrigerant Safety System
Stainless Steel Centrifugal Water Pump
Automatic Water Refill System
Polyethylene Water Storage Tank
Air Cooled Condenser
Low Water Flow Safety Switch
Water Filter Strainer
Washable Air Intake Filter
Water Pressure Gauge
Check Valve on Water Out Line
Solenoid Valve on Water Return Line

Available Optional Features:

Water Cooled Condenser
Manual Refill System With Sight Glass
Casters
Split System With Remote Condenser
Low Temperature Kit For Outside Installation
Controller For Remote Analog Temperature Setting

THE C SERIES

Includes models 8400 through 8650R (15 to 50 tons). This series is typically used for central plant and large process water applications.

For resistance welding applications, models in this series will chill up to 100 spot welders (up to 75 KVA each).

Standard Features:

Three Pole Circuit Breaker/Disconnect
Remote Condenser on Models With “R” In Model Number
Stainless Steel Brazed Plate Condenser
2-Stage Digital Water Temperature Controller
Water Freeze Safety System
High & Low Refrigerant Safety System
Centrifugal Water Pump
Automatic Water Refill System
Polyethylene Water Storage Tank
Air Cooled Condenser
Low Water Flow Safety Switch
Water Filter Strainer
Washable Air Intake Filter
Water Pressure Gauge
Check Valve on Water Out Line
Solenoid Valve on Water Return Line
Dual Staged Compressors For Models 8400-8451
Double Stage Compressor With Unloader on Models 8500-8650R
Low Pressure Pump Down Between Cycles on Models 8500-8650R

Available Optional Features:

Water Cooled Condenser
Manual Refill System With Sight Glass
Split System With Remote Condenser (Standard On 8550R-8650R Models)
Low Temperature Kit For Outside Installation
Controller For Remote Analog Temperature Setting

DOWNLOADS

Using Unitrol Chillers for Resistance Welding Applications

UNITROL chillers are designed to handle a large variety of industrial water cooling applications. Over the years, UNITROL has produced a large volume of chillers for use in resistance (spot) welding applications. Our experience in sizing chillers used in welding lines allows us to provide the most economical match of chiller and application.

Why You Need the Unitrol System for Your Welding Line

All UNITROL Spot Welder Chillers are self-contained, closed-loop refrigeration systems which recirculate a continuous supply of cold water virtually eliminating all water consumption. This means it’s unnecessary to use city or well water which presently contaminates your water lines. So down-time for cleaning and descaling of mineral deposits is totally eliminated.

Consistent pressure and low temperature is also maintained in the cooling water, helping to reduce down-time for copper tip replacement as much as 50%. Your weld quality and uniformity is also greatly improved. The result is increased production, more efficient operation, more actual output hours. After all, it’s only when your machines are running that you’re turning out billable product.

Unitrol Chillers Pay for Themselves in the First Year

You will immediately realize an impressive increase in quality production and output hours with drastic reduction of costly tip replacement. As an example, an elimination of as little as 10 minutes per day of tip dressing represents a typical annual savings per operator of over $1,000.00. By adding the elimination of costly water, high sewer taxes, and EPA mandated water processing, you can easily realize a payback of the entire chiller cost within 5 to 12 months.

Another money saving tip: The air exhaust from the chiller can be used to heat your building, and the heat can be exhausted out during the warm months.

Why Buy Unitrol Chillers?

Unitrol has since 1971 only manufactured “automotive grade” chillers which come complete with features that are extra cost or not available on their line of “commercial grade” chillers. And yet the cost to you is about the same. And when you add the cost they charge as options for these features, Unitrol comes out at a lower cost.

These features are supplied at no extra cost to handle continuous operation at full capacity under the harshest of industrial conditions:

Automatic water refill system to keep tank full even with leaks outside chiller (not on model 8000)
Backflow safety kit to prevent water overflow in tank when system is shut off. Kit includes zero pressure water solenoid valve, and check valve (5-ton and larger chillers).
Pressure bypass water system to keep flow through evaporator above minimum requirements. Allows operation at all outside water flow rates (except model 8000 mini-chiller)
Washable air intake filter to keep condenser clean and maintain efficiency
Cleanable filter/strainer on water return prevents contaminants from reducing the efficiency of the cooling evaporator and also prolongs the life of the water pump. This component can be flushed without draining or turning off the chiller.
Stainless Steel “brazed plate” evaporators, mounted outside of water tank. Because of the flow rate through this evaporator the system is self-cleaning Washable filter on air intake eliminates the need to continuously clean condenser coils. This is a major advantage when it comes time for service of the chiller.
Stainless Steel water pumps with ceramic seals
Non-metallic water tank with non-metallic and brass fittings.
5 Ton through 10 Ton Water Chillers
Electronic digital temperature controller. These controllers are staged for maximum efficiency on 15-ton chiller
Low water flow safety system to protect refrigeration components stops the compressor if a fault occurs that could freeze the system
All water passage fittings are non-ferrous to prevent internal rust accumulation
Low pressure and High Freon safety system
Fault indicator lights for Freon and Low Water Flow faults
Ability to service or inspect chiller “hot” with all panels removed

Outdoor Applications:

Chillers can be ordered with outdoor kits installed for use in any ambient temperature.

Typical Applications:

RESISTANCE (SPOT WELDERS)
INDUCTION WELDERS AND FURNACES
MIG AND TIG WELDERS
HYDRAULIC FLUID COOLING
X-RAY AND OTHER MEDICAL EQUIPMENT
LASERS
ABRASIVE CUTTING
CHEMICAL AND PHARMACEUTICAL
FOOD AND BEVERAGE
LABORATORY
MEDICAL CHILLERS

Customizing a UNITROL Chiller:

UNITROL can modify any chiller model to handle special applications such as:

Electrical: 380V or 575V, 50Hz frequency
Water Pumps: Special flow or pressure requirements
Dual Water Pumps: One pump for internal refrigeration, one for outside load
Added Cooling Loops: To chill more than one circuit (Often used for Seam Welding flood cooling)
Split systems to place heat-producing condenser outside of building
Manual water refill with sight glass to replace automatic refill system
Alarms and interlocking systems

Non-Refrigerated Coolers:

UNITROL also manufactures non-refrigerated systems that will cool water down to as low as 5°F above room temperature. These systems include a fine-finned radiator, water tank, water pump and controls. Sizes range from nominal 24,000 BTU/Hr to 1,000,000 BUT/Hr. Contact UNITROL sales to select the appropriate model number.

Water Cooled Chillers:

Standard model chillers are provided with Air Cooled Condensers. UNITROL can also provide any of our chillers with Water Cooled Condensers.

Water Chiller and Inline Booster Master Chart

CHILLERS: These units are self-contained and include a WATER TANK and WATER PUMP. Chillers recirculate water and are considered “Closed Loop” systems.

INLINE BOOSTERS: Boosters use water supplied from an outside source and do not include a WATER TANK or WATER PUMP. Inline Boosters do not recirculate water.

SERIES	CHILLER MODEL*	INLINE BOOSTER MODEL**	TONS	BTU/HR OUTPUT @90⁰F	KW OUTPUT @90⁰F	FAN HP	CHILL AVERAGE QTY. OF WELDERS#	LINE VOLTAGE	INLINE BOOSTER FULL LOAD AMPS	CHILLER						DIMENSIONS			APPROX. SHIPPING WEIGHT (LBS.)
										FULL LOAD AMPS	STANDARD PUMP HP*	PUMP OUTPUT GPM	WATER TANK CAP. (GAL)	AUTO WATER REFILL SYSTEM	PRESSURE GAUGES	L	W	H
	8000	8000B	1/3	4,000	1.2	1/12	15	115/1/60	13	16	1/3	3@35psi	2	NO	NO	16	26	20	150
THE "A" SERIES	8015	8015B	1/2	6,000	1.8	1/16	1	230/1/60	10	16	1	20@35psi	15	YES	NO	46	28	29	425
	8025	8025B	3/4	8,000	2.3	1/6	1	230/1/60	10	14	1	20@35psi	15	YES	NO	46	28	29	425
	8026	8026B	3/4	8,000	2.3	1/6	1	115/1/60	21	29	1	20@35psi	15	YES	NO	46	28	29	425
	8050	8050B	1	12,000	3.5	1/6	2	230/1/60	8	15	1	20@35psi	15	YES	NO	46	28	29	435
	8051	8051B	1	12,000	3.5	1/6	2	460/3/60	4	7	1	20@35psi	15	YES	NO	46	28	29	435
	8052	8052B	1	12,000	3.5	1/6	2	115/1/60	20	28	1	20@35psi	15	YES	NO	46	28	29	435
	8055	8055B	1.5	18,000	5.3	1/6	3	230/1/60	18	22	1	20@35psi	15	YES	NO	46	28	29	455
	8075	8075B	1.5	18,000	5.3	1/6	3	230/3/60	11	14	1	20@35psi	15	YES	NO	46	28	29	455
	8076	8076B	1.5	18,000	5.3	1/6	3	460/3/60	7	8	1	20@35psi	15	YES	NO	46	28	29	455
	8100	8100B	2.25	24,000	7	1/6	4	230/1/60	22	26	1	20@35psi	15	YES	YES	58	28	29	525
	8101	8101B	2.25	24,000	7	1/6	4	230/3/60	15	17	1	20@35psi	15	YES	YES	58	28	29	525
	8102	8102B	2.25	24,000	7	1/6	4	460/3/60	7	9	1	20@35psi	15	YES	YES	58	28	29	525
	8110	8110B	3.25	40,000	11.7	1/6	7	460/3/60	14	15	1	20@35psi	15	YES	YES	58	28	29	625
	8111	8111B	3.25	40,000	11.7	1/6	7	230/3/60	26	28	1	20@35psi	15	YES	YES	58	28	29	625
THE "B" SERIES	8200	8200B	5	60,000	17.6	1/4	10	460/3/60	14	17	2	50@35psi	15	YES	YES	50	52	38	1,015
	8201	8201B	5	60,000	17.6	1/4	10	230/3/60	29	34	2	50@35psi	15	YES	YES	50	52	38	1,015
	8250	8250B	7.5	90,000	26.3	1/4	16	460/3/60	16	19	2	50@35psi	15	YES	YES	50	52	44	1,220
	8251	8251B	7.5	90,000	26.3	1/4	16	230/3/60	33	38	2	50@35psi	15	YES	YES	50	52	44	1,220
	8300	8300B	10	120,000	35.3	1/4	20	460/3/60	20	23	3	80@35psi	15	YES	YES	50	52	44	1,285
	8301	8301B	10	120,000	35.3	1/4	20	230/3/60	40	45	3	80@35psi	15	YES	YES	50	52	44	1,285
THE "C" SERIES	8400	8400B	15	180,000	52.7	1/4	30	460/3/60	37	41	3	80@35psi	30	YES	YES	120##	45##	51##	2,375##
	8401	8401B	15	180,000	52.7	1/4	30	230/3/60	69	77	3	80@35psi	30	YES	YES	120##	45##	51##	2,375##
	8450	8450B	20	240,000	70.3	1/4	40	460/3/60	45	52	5	180@35psi	60	YES	YES	120##	45##	51##	2,930##
	8451	8451B	20	240,000	70.3	1/4	40	230/3/60	90	104	5	180@35psi	60	YES	YES	120##	45##	51##	2,530##
	8500	8500B	25	300,000	87.9	1/2	50	460/3/60	58	65	5	180@35psi	60	YES	YES	130	33	51	3,070
	8550R***	8550BR***	30	360,000	87.9	1	60	460/3/60	83	93	7 1/2	230@35psi	90	YES	YES	130	33	52	3,935
	8600R***	8600BR***	40	480,000	140	1	80	460/3/60	87	108	7 1/2	230@35psi	90	YES	YES	130	33	52	4,285
	8650R***	8650BR***	50	600,000	140	1	100	460/3/60	111	132	10	310@35psi	90	YES	YES	130	33	52	4,720

NOTES:
*: CHILLERS include a WATER TANK and WATER PUMP. Other size water pumps are available to produce higher water pressure or water flow rates.
**: INLINE BOOSTERS use water pushed from an outside source and do not include a WATER TANK or WATER PUMP.
***: REMOTE CONDENSER: Models ending with “R” are shipped in two pieces. The inside component contains water tank, water pump, controls, and cooling evaporator. The outdoor component contains compressor, and heat-producing condenser. Customer field installation of refrigeration piping and electrical control lines is required. Dimensions shown are for the inside components only.

#: RESISTANCE WELDING APPLICATIONS: When used to chill resistance welders. This column is calculated to cool up to the listed quantity of 75 KVA or smaller single point spot welders under typical conditions. For other applications consult Unitrol for sizing assistance.

##: These Models are dual compressor systems. They are supplied in two modules, each with the dimensions shown. The total weight for the two modules is as shown on the chart.

MODEL 8000 is designed to chill one spot welder (40 KVA or smaller) or up to two 250A TIG welders. It can also be used for small laboratory processes.

Unitrol Water Chillers

Unitrol Water Chillers

Water Chillers for Spot Welders

MODEL 8000 CHILLER

Standard Features:

Available Optional Features:

MODEL 8012 CHILLER

Standard Features:

Available Optional Features:

THE A SERIES

Standard Features:

Available Optional Features:

THE B SERIES

Standard Features:

Available Optional Features:

THE C SERIES

Standard Features:

Available Optional Features:

DOWNLOADS

Using Unitrol Chillers for Resistance Welding Applications

Why You Need the Unitrol System for Your Welding Line

Unitrol Chillers Pay for Themselves in the First Year

Why Buy Unitrol Chillers?

These features are supplied at no extra cost to handle continuous operation at full capacity under the harshest of industrial conditions:

Outdoor Applications:

Typical Applications:

Customizing a UNITROL Chiller:

Non-Refrigerated Coolers:

Water Cooled Chillers:

Water Chiller and Inline Booster Master Chart

Sitemap

Hours