Here are some sample resistance weldngapplications for the IP-200B High Freqency Inverter Power Supply.
For more examples see the Microweldingapplications page.
Control Power: | 3 degree 180 to 240VAC 50/60Hz (automatic selection) |
---|---|
Frequency: | 4kHz |
Feedback Rate: | 125 microseconds |
Current Control: | Constant Current (Primary) |
Maximum Output Voltage: | 8.1 Volts |
Current Range: | 400 to 2500A |
Weld Schedule: | 8 schedules (0-->7) Panel Selector Binary Code Select Rise: 1: 00 to 49 ms Weld 1: 00 to 99 ms Cool: 00 to 99 ms Rise 2: 00 to49 ms Weld 2: 000 to 299 ms |
Weld Current Monitor: | +/-5% to +/-49% |
Diagnostic Codes: | <**> No Current or Current MonitorOff |
I/O Signals: | 1 - Start Input 2 - Com 3 - Schedule 1 Input 4 - Schedule 2 Input 5 - Schedule 4 Input 6 - Reset Input 7 - No Entry Input (Program Lock) 8 - Com 9 - Weld On / Off 10 - Com 11 - End Output 12 - End Output 13 - Trouble Output 14 - Trouble Output |
Dip Switches: | Switch 2 - Monitor Off |
Transformer Rated Capacity: | 5.0 kVA |
Duty Cycle: | 3.5% (2500A), 4.0% (2250A), 5.0%(2000A) |
Dimensions (H x W x D): | 10.6 x 6.8 x 15.7 inches (269 x 172 x 400 mm) |
Weight: | 26.5 lbs. (12 kg) |
Ordering: Includes power supply, weld startconnector and cable, and manual.
Suggested Accessories: Miyachi FineSpot MH-80 Series Weld Heads, FSAC foot pedal. (The specific weld headis dependent on application).
For more help determining the correctcomponets for your application,feel free to contact T. J. Snow.