ENTRON EN6001 Constant Current AC Controls with Retrofit/Upgrade Option
T. J. Snow is proud to introduce the next generation of Entron’s single phase resistance weld controls. The EN6001 Control offers a user-friendly interface, the quality the Entron name is known for, along with added quality control features that are required in today’s production environment. The control is available in a complete package in all the traditional cabinet sizes or as a retrofit kit that will allow you to upgrade your existing EN1000/1001 control in less than 30 minutes. For more information contact T. J. Snow Co.
Options to upgrade your existing Entron EN1000/1001 to the new EN6001
You might also be interested in:
Single Phase AC Controls
Inverter (MFDC) Controls
Three Phase DC Controls
Specialty Controls
Weld Checker
Main Features
- 64 Programs (Internal or External Selection)
- Single SCR
- Primary or Secondary Constant Current
- Current Monitor High / Low Limits
- Primary Voltage Monitoring
- 10 Inputs (4 Fixed; 6 Programmable across 15 functions)
- 7 Outputs (3 Fixed; 4 Programmable across 12 functions)
Additional Features
- On Timer Membrane Keyboard with backlit 128×64 (81 lines) LCD graphic display
- Electrode management functions, including stepping, tip-dressing and preset curves
- Welding programs may be linked together for complex spot schedules (chained or successive)
- Refresh firmware through USB device
- Load / export control settings from / to USB device
- AC 60/50 Hz welding supported
- Spot / Pulsation / Seam Welding / Flash or Butt Welding / Brazing
- Multiple weld intervals plus pulsation, upslope and downslope
- Air-over-oil gun operation
- Retraction-maintained and momentary
- Water-saver
- Head lock function
- Phase shift monitor
- Half-cycle operation (Alt. / Pos. / Neg.)
Options
- Program Lockout (key switch)
- Operation Mode Switch (Program Lockout and Weld / No Weld)
- Error Reset Switch
- Vault Closing Door Mechanism (D & T cabinet doors equipped with vault locking mechanism to ensure security)
- Can be applied to spot welders, seam welders, special machines, or robotic equipment for welding materials of unequal thickness and coated materials
- Multiple cabinet options (Available in C, D, T, E, S cabinet styles with front or side-mounted control panels.)
- Circuit breakers available in C, D, T, and L cabinets (100A, 200A, 250A, 400A, 600A, 800A)
Weld Schedule Functions
- Schedule Number: 0 to 63
- Squeeze Delay: 0 to 99 cyc, 50/60 Hz
- Valve Mode: None / All combinations of 3 valves
- Weld1 Time: 0 to 99 cyc, 50/60 Hz
- Weld1 Current Regulation Mode: Phase Shift / Constant Current
- Heat1: 0 to 99% or 0 to 100.00 kA
- Cool1 Count: 0 to 99 cyc, 50/60 Hz
- Slope Control/ Up and Down Slope: 0 to 99 cyc, 50/60 Hz
- Weld2 Time: 0 to 99 cyc, 50/60 Hz
- Heat2: 0 to 99% or 0 to 100.00 kA
- Weld2 Current Regulation Mode: Phase Shift / Constant Current
- Current2 Count: 0 to 100.00 kA
- Cool2 Count: 0 to 99 cyc, 50/60 Hz
- Hold Count: 0 to 99 cyc, 50/60 Hz
- Off Count: 0 to 99 cycles
- Impulses: 1 to 99 cycles
- Heat / Current Offset: -15 to +15%
- Cycle Mode: Non-repeat / Repeat / Chained / Successive / Wait-here
- Digital Phase Shift Current Control, 10 to 99% in 1% current steps all weld current functions
- It is NOT necessary to program functions NOT required, program only functions required